The power management of modern mobile phones is perfect. After the mobile phone is full, the charger is in light load operation, and the output current is very small. Because the battery is basically full, the current that can flow is very small. At this time, the chip automatically stops charging and the battery changes to the discharge mode. Also use an external charger to work together. In theory, there is no harm to the phone because there are many protection mechanisms in control of this process. However, considering that after connecting the charger, the system becomes complicated, and the probability of the problem will indeed become high, so it is full of pulling or not, it is up to you to decide. Considering safety, unattended situations, it is better to unplug it.

Depending on the voltage on the charger, the voltage is usually printed on the surface of the charger:

If you print 100~220V on it, you can use it in Taiwan.

If you only print 220V, then you need to bring a conversion socket.

The frequency varies according to the voltage of different countries.

China's single-phase electrical frequency is 50Hz. According to preliminary statistics, global single-phase electricity has basically only two frequencies of 50 Hz and 60 Hz, and the voltages are different, ranging from 100, 110, 120, 127, 220, 230, and 240.

We offer a 12-month warranty.